Panasonic FP0R User Manual page 245

Appendix
1)
High-speed counter
Pulse output (not available for C10, C14)
PWM output (not available for C10, C14)
Pulse catch inputs
Number of interrupt programs
Periodical interrupt
Constant scan
Using instructions F12 and P13
3)
F-ROM backup
Automatically when power is cut off
RAM backup (T32 and F32 only)
Clock/calendar function
Communication ports
Self-diagnostic function
1)
These are the specifications when the rated input voltage is 24V DC at 25°C. The frequency will decrease
depending on voltage, temperature or usage condition.
2)
A total of 4 channels is available for pulse output and PWM output.
Pulse output can be specified up to 50kHz. PWM output can be specified up to 4.8kHz. A maximum error on
the pulse width of 40s may occur for the setting value depending on voltage, temperature or operating
condition.
3)
Writing is possible up to 10000 times.
4)
All memory areas including timers/counters, internal relays, link relays, link registers and data registers can be
backed up. Areas to be held and not to be held can be specified in the system registers.
5)
The optional battery has not been charged when it is shipped from the factory. It must be charged before you
can use it. The battery does not have an alarm function when it is running low. When it is empty, the hold areas
will become indefinite. However, the values will be cleared to 0 the next time the power is turned on. (We
recommend adding a program for clearing the data to 0 when the values in the hold areas become indefinite.)
6)
Precision: at 0C: error <104s/month; at 25C: error <51s/month; at 55C: error <155s/month
244
Item
1)2)
1)2)
4)
6)
C10, C14, C16
1-phase: 6 channels (max. 50kHz)
2-phase: 3 channels (max. 15kHz)
4 channels (max. 50kHz)
4 channels (max. 4.8kHz)
8 (including high-speed counter and interrupt input)
8 external inputs (C10: 6)
1 periodical interrupt
4 target value match interrupts
0.5ms–1.5s (unit: 0.5ms), 10ms–30s (unit: 10ms)
0.5ms–600ms (unit: 0.5ms)
All areas (32765 words)
Counter relays: 16 (C1008–C1023)
Internal relays: 128 (R2480–R255F)
Data registers: 315 words
DT12000–DT12314
T32: All areas (built-in backup battery)
F32: All areas
Available for T32 only.
TOOL port, USB port, COM port
E. g. watchdog timer, program syntax check
(Watchdog timer: approx. 690ms)
C32, T32, F32
DT32450–DT32764
5)