Panasonic FP0R User Manual page 226

2
"01234567" "abcdefgh"
Programs can only be downloaded to PLCs that are protected by identical passwords (see
table below)
The FP Memory Loader contains a password protected program:
1
Password: 01234567
2
Download is possible only if the target PLC is protected by the same password ("01234587").
3
Download to a target PLC that is protected by a different password ("abcdefgh") is not possible.
4
Download to a target PLC that is not password-protected (-----) is not possible.
CAUTION
During program download from the FP Memory Loader to a target PLC, the
password set on the source PLC may be changed under certain conditions:
Security setting on FP Memory Loader Password setting on target PLC after download
No password set
8-digit password set, "Allow download to PLC
only if password in the PLC is the same"
setting disabled
8-digit password set, "Allow download to PLC
only if password in the PLC is the same"
setting enabled
1
"01234567"
3 4
-----
Password will be cleared.
Password will be overwritten with new 8-digit password.
Password will not be changed (no download possible).
Security Functions
225