Panasonic FP0R User Manual page 70

 Do NOT install the CPU as shown below.
1
1
Upside-down
2
Upside-down
3
Input and output connectors face down
4
Input and output connectors on top
5
Horizontal installation of the unit

Do not install the unit above devices which generate heat such as heaters,
transformers or large scale resistors.
Installation space

Leave at least 50mm of space between the wiring ducts of the unit and other devices
to allow heat radiation and unit replacement.

Maintain a minimum of 100mm between devices to avoid adverse affects from noise
and heat when installing a device or panel door to the front of the unit.
≥
100mm

Keep the first 100 mm from the unit's front surface clear of objects to allow wiring and
2 3
≥ 50mm
≥ 50mm
4
1 PLC
2 Other device
Panel door
3
Installation and Wiring
5
69