Cn-4058 Board - Sony HDCU3500 Service Manual

2-19-5.

CN-4058 Board

Required tool: Nut driver bit NDT-DIN/Canare Electric Co., Ltd. products
Preparation
1. Remove the top cover. (Refer to
2. Remove the optical cable. (Refer to step 1 in
3. Remove the audio panel (REC) assembly. (Refer to step 2 in
Procedure
1. Remove the CN-4058 board.
(1) Disconnect the harness from the connector (CN101) on the CN-4058 board.
(2) Remove the two nuts.
(3) Remove the CN-4058 board from the audio panel (REC) assembly.
CN101
Harness
CN-4058 board
Audio panel (REC) assembly
2. Install the removed parts by reversing the steps of removal.
HDCU3500/HDCU5500
"2-2. Top Cover")
"2-4-1. LEMO Connector
"2-19-4. Optical Conversion
Assembly")
Adaptor")
Nuts
2-59