Incom-Rec Panel Assembly - Sony HDCU3500 Service Manual

2-19-3.

INCOM-REC Panel Assembly

Preparation
1. Remove the top cover. (Refer to
2. Remove the optical cable. (Refer to step 1 in
3. Remove the ENC assembly. (Refer to
Procedure
1. Remove the INCOM-REC panel assembly.
(1) Remove the five screws, then remove the INCOM-REC panel assembly.
(2) Remove the two screws, then remove the CN-4056 board.
Note
When attaching the INCOM-REC panel assembly, attach it so that the harness is routed inside of the FP-305
board.
Front side
INCOM-REC panel assembly
P2.6 x 5
(a)
P2.6 x 5
Note
When attaching the INCOM-REC panel assembly, tighten the screws in the following sequence: (a), (b) and others.
2. Install the removed parts by reversing the steps of removal.
HDCU3500/HDCU5500
"2-2. Top Cover")
"2-4-1. LEMO Connector
"2-19-1. ENC Assembly")
Harness
(b)
Assembly")
CN-4056 board
View on arrow A
Harness
FP-305 board CN-4056 board
t
Process the harness of the CN-4056 board
so that it is routed inside of the FP-305 board.
A
CN002
2-56