2.
Remove the SC-ST optical conversion adaptor.
(1) Remove the screw (M2 x 6), and then remove the ST connector cap.
(2) Remove the four screws (M2 x 6), and then remove the two SC-ST optical conversion adaptors.
(3) Remove the two screws (P2.6 x 5), and then remove the SMF bracket from the SMF panel.
A
SMF panel
SMF bracket
3.
Install the removed parts by reversing the steps of removal.
HDCU3500/HDCU5500
P2.6 x 5
Notches
A
P2.6 x 5
SC-ST optical conversion adaptor
SC-ST optical conversion adaptor
M2 x 6
M2 x 6
M2 x 6
ST connector cap
2-50