2-5.
Top Chassis/Air Distributor Assembly
Tip
The top chassis and the air distributor assembly is not supported by service.
Preparation
1.
Remove the top cover. (Refer to
2.
Remove the optical cable. (Refer to step 1 in
Procedure
1.
Remove the nine screws, and then remove the top chassis.
Top chassis
Front side
Note
When attaching the upper chassis, insert two portions A of the straightening plate assembly into the two holes of
the upper chassis.
HDCU3500/HDCU5500
"2-2. Top
Cover".)
"2-4-1. LEMO Connector
PSW
3 x 8
Holes
Assembly".)
PSW
3 x 8
Portions A
2-12