Connecting
Connector
Guide
Connecting connector
Contact surface
Note
Insert the connector carefully so that the connector guides are not caught by the edge of the mating connector.
1.
Hold both sides of the fine-wire coaxial cable connector with the contact surface facing up.
2.
Insert the connector straight to meet the angle specified.
Type B
Disconnecting
Pull-bar
A
1.
Raise the pull-bar in the direction of arrow A to unlock it.
2.
Hold both sides of the fine-wire coaxial cable connector, and pull the connector straight to disconnect it.
HDCU3500/HDCU5500
Fine-wire coaxial cable
Guide
Correct
Fine-wire
coaxial cable
Connector
Wrong
Angle regulation
Hold the connector to disconnect.
Do not attempt to disconnect by
pulling the cable.
Less than 2°
Less than 5°
1-21