2-3-2.
FP-305 Board
Preparation
1.
Remove the top cover. (Refer to
2.
Remove the front panel assembly. (Refer to
Procedure
1.
Disconnect the flexible flat cable from the connector (CN001) on the FP-305 board.
2.
Disconnect the harness from the connector (CN202) on the FP-305 board.
3.
Remove the four screws, and then remove the FP-305 board.
4.
Disconnect the harness from the connector (CN003) on the FP-305 board.
5.
Remove the rotary encoder knob and two cushions.
Front panel assembly
View on arrow A
Cushions
6.
Install the removed parts by reversing the steps of removal.
HDCU3500/HDCU5500
"2-2. Top
Cover".)
"2-3-1. Front Panel
Rotary
encoder knob
Harness
Cushions
FP-305 board
Assembly".)
Front side
Flexible flat cable
Harness
CN003
CN202
CN001
PSW
3 x 8
FP-305 board
2-4