Sony HDCU3500 Service Manual page 30

Connecting
Pull-bar
Contact surface
Connecting connector
Fine-wire coaxial cable
Pull-bar
B
Note
Insert the connector carefully so that the connector guides are not caught by the edge of the mating connector.
1. Hold both sides of the fine-wire coaxial cable connector with the contact surface facing up.
2. Insert the connector straight to meet the angle specified.
3. Turn the pull-bar in the direction of arrow B and lock it.
Type C
Disconnecting
1. Use a tool with a hook as shown above. Hook the tool's hook to the connector of the fine-wire coaxial cable.
2. Lift the tool straight in the arrow direction with the hook hooked to disconnect the connector of the fine-wire coaxial
cable.
Connector
HDCU3500/HDCU5500
Fine-wire coaxial cable
Tool
Hook
Hook
Fine-wire coaxial cable
Angle regulation
Hook the tool's hook to the connector of
the fine-wire coaxial cable.
Connector
Do not attempt to disconnected by
Wrong
pulling the cable.
Less than 2°
Less than 5°
1-22