Sony HDCU3500 Service Manual page 63

Procedure
1. Remove the power top assembly.
(1) Remove the five screws (K3 x 6), then remove the side cover (PS).
(2) Disconnect the three harnesses from the connectors (CN101, CN102 and CN1003) on the RE-345 board.
(3) Remove the five screws (K3 x 6) and the screw (PSW3 x 6), then remove the power top assembly in the
direction of the arrow.
(4) Disconnect the three harnesses from the connectors (CN1002, CN2002 and CN3001) on the RE-345 board.
Note
When removing the power top assembly, be careful not to damage the harness connected to the RE-345 board.
RE-345 board
Harness
K3 x 6
K3 x 6
Note
When assembling, attach it with the harness connected to the connector (CN2002) on the RE-345 board brought
near the front panel (PS) side.
HDCU3500/HDCU5500
CN1003
Power top assembly
CN3001
Harness
Harness
Harness
K3 x 6
Side cover (PS)
CN101
CN102
CN2002
CN1002
Harness
Front panel (PS)
Harness
K3 x 6
PSW
3 x 6
2-29