Defining Keyboards; Adding Keyboard Definitions - American Dynamics MegaPower 3200 Administrator's Manual

To view Salvo callups from the Definitions –
Cameras screen:
1. Click on a camera.
2. Click the Salvo Callups tab on the Definitions –
Cameras screen (Figure 80 on page 36).
Figure 80. Salvo callups screen
The Salvo Callups tab displays the following
information:
• SalvoNumber – Displays the Salvos associated
with selected cameras.
• Position – Number associated with a salvo, as
defined in Column 1 (Position) of the Switching –
Salvo – Cameras tab screen.
• PresetPattern – Displays the number assigned to
the preset coordinates or pattern moves that the
camera will execute when that camera is called
by this salvo. This number is assigned in Column
3 (PresetPattern) of the Switching – Salvo–
Cameras tab screen.
• Aux – Displays the On, Off, or Don't Care state of
devices designated as Aux 1, Aux 2, or Aux 3
when that camera is called by this salvo. This
parameter is assigned in Column 4 (Aux) of the
Switching – Salvo – Cameras tab screen.
• Link – Displays the link state. Options are:
– No – The salvo will not execute any parameters
beyond those defined in that row.
– Yes – The salvo will link to and execute the
next line.
– Salvo – The salvo will link to and execute the
next salvo.
Deleting Salvo Callups
To delete salvo callups:
1. Click on a camera in the upper screen.
2. Left click the left header of the row in the lower
screen that contains the salvo callup to be
deleted.
3. Press the keyboard Delete key of the PC running
EASY CPU. The Delete Rows dialog box
appears.
MEGAPOWER CPU
ADMINISTRATOR'S GUIDE
Figure 81. Delete Rows dialog
4. Click Yes to delete the salvo callup or No to close
the dialog box without deleting the salvo callup.

Defining Keyboards

The Definitions – Keyboards screen allows you to
identify keyboards and the ports that connect them.
Click on the Definitions – Keyboards link in the
Explore menu to begin. The Keyboards screen
appears.
Figure 82. Definitions – Keyboards screen
The Definitions – Keyboards screen is split into an
upper and lower screen
• The upper screen shows existing keyboard
definitions and allows you to create new
definitions.
• The lower screen provides two tabs that allow
you to set up monitor access and site access for
each keyboard.

Adding Keyboard Definitions

You can create, edit, and delete keyboard definitions.
1. To add new keyboard definitions, click Add on the
right side of the screen. The Add Keyboard dialog
box appears (Figure 83 on page 37).
36 of 72
8200-0421-03, REV. D