Setup Alarms Worksheet - American Dynamics ADTT16 Operator's Manual

Setup Alarms Worksheet

Fill out the Setup Alarms Worksheet before you begin actually setting up an
alarm. This worksheet enables you to determine the following:
which inputs on which domes will trigger an alarm when their state
changes from normal to abnormal (remember, the normal and abnormal
states for each input are listed on the List of Inputs & Outputs)
the camera whose video will be displayed and whose output will be
initiated when the alarm is triggered
the kind of video action that will take place when the alarm is triggered
(either a Quick View, a Pattern, or a fixed shot)
the specific number assigned to the Quick View or Pattern that will be
displayed when the alarm is triggered
the specific number assigned to the output, if any, that will be initiated
when the alarm is triggered
On the following page is a sample Setup Alarms Worksheet. If you set up
this sample alarm, the LCD will look like the one illustrated below the
worksheet.
Once you fill out this worksheet, use it to help you set up the system alarms.
These worksheets can also help you to interpret what appears on the LCD
when the system is in the alarm mode.
Appendix A: Programming Worksheets A-15