Defining The Sequence - American Dynamics ADTT16 Operator's Manual

Defining the Sequence

Tip: You must use the Main T
The following procedure describes how to define the Sequence.
1. Press the Menu button on the keypad.
The T
menu appears:
2. Press the appropriate button—zoom or focus—to select Define
Sequence.
If the Sequence has not been defined, or if the first event in the Sequence
was not defined, the LCD looks like this:
If someone has already set up the Sequence, and the first event has been
defined, the information for the first event in the Sequence appears on
the LCD. For example:
3. Use the Tracker Ball to scroll to the event you want to define.
4. In the Cam field, indicate the camera on which this event was defined, or
the camera whose fixed shot you want to include. Use the number
buttons to enter the camera number.
4-10
T is now in the menu/programming mode, and the
OUCH RACKER
T to define the Sequence.
OUCH RACKER
Calibration
Define Sequence
Evt Cam Act Dur
01 -- View- --
Evt Cam Act Dur
01 7 View25 10
Operator's Manual