Display the ID code for the currently selected dome. (Refer to
"Displaying a Dome's ID Code," in Chapter 5.)
In the camera control mode, the currently selected camera number appears
on the LCD. If there is a Quick View or a Pattern running, this is also
indicated.
In this mode the Tracker Ball functions as the camera pan/tilt controller, and
the zoom and focus buttons control the zoom and focus of the currently
selected camera.
Menu/Programming Mode
You activate the menu/programming mode by pressing the Menu button on
the keypad. When the T
the LCD displays the available menu selections, and the Tracker Ball
functions as a cursor controller, enabling you to scroll through the menu
selections.
The zoom and focus buttons enable you to select an item on the menu. There
are always two menu items visible at one time on the LCD. Use the left
button (the default "zoom" button) to select the item on the top line. Use the
right button (default "focus" button) to select the item on the bottom line.
About AD T
T
OUCH
RACKER
OUCH
16
T
is in the menu/programming mode,
RACKER
1-9