American Dynamics ADTT16 Operator's Manual page 16

The system's cameras enable you to monitor activity throughout a facility
from a single location. You can see video from up to 16 cameras. The
AD T
non-programmable domes, PTZ cameras, and fixed cameras.
The T
manually control their movement, as well as adjust their zoom, focus,
and iris. The T
operations and clear system alarms. With the T
access the menu to program automated system functions and use the
utilities.
If there are two T
configure one as the Main T
T
functionality described in this manual. The Call T
however, has no programming capabilities, and it cannot select a monitor
display format, initiate the Sequence, or clear alarms.
The video monitor displays the camera's video. You may have only one
monitor, you may have two monitors, or you may have a separate
monitor dedicated for every camera. If a system contains two monitors,
one is referred to as the Main monitor and the other as the Call monitor.
The Main monitor displays video in a multiplexed format and is
controlled by the Main T
for full-screen view only, and its video is controlled by the Call T
T
The Quad Splitter or Multiplexer is the unit that allows video to be
displayed in a multiplexed format. The quad splitter enables you to see
video from up to 4 cameras simultaneously on one monitor. A
multiplexer enables you to see video from up to 16 cameras
simultaneously on one monitor.
1-6
T
OUCH RACKER
T
OUCH RACKER
T
OUCH
OUCH
T . The Main T
OUCH RACKER
.
RACKER
16 system is compatible with programmable and
is the device you use to select cameras and
enables you to perform automated camera
RACKER
T s installed with your system, you must
RACKER
T
OUCH RACKER
T
OUCH RACKER
T . The Call monitor is dedicated
OUCH RACKER
T you can
OUCH RACKER
and the other as the Call
employs all of the
T
OUCH RACKER
Operator's Manual
,
OUCH