Toggling Automatic/Manual Alarm Acknowledgment
The default setting for the T
after 60 seconds. You can, however, change this to have alarms manually
acknowledged by the system operators.
To toggle the Automatic/Manual Alarm Acknowledgment function, do the
following:
1. Press the D button.
If Automatic Alarm Acknowledgment is enabled, you will see the
following:
If Manual Alarm Acknowledgment is enabled, you will see the
following:
2. Press D again to change alarm acknowledgment to the preferred type.
3. Press the Clear button to return the LCD to camera control mode.
TOUCH TRACKER Utilities
T
is to automatically clear alarms
OUCH
RACKER
Auto Ack Alarm
Manual Ack Alarm
5-9