American Dynamics ADTT16 Operator's Manual page 59

3. When you have the perfect "starting point" picture displayed on the
monitor, press the Menu button.
The T
menu appears:
4. Use the Tracker Ball to scroll through the menu selections until Record
Pattern is displayed.
5. Press the appropriate button—zoom or focus—to select Record
Pattern.
The following prompt appears on the LCD:
I M P O R T A N T
The Auto Pan must be programmed for Pattern 1 only.
6. Press the number 1 on the keypad.
The following message appears on the LCD:
7. The Auto Pan is now being recorded. Any extraneous up or down
movement will be ignored when programming the Auto Pan.
Defining Automatic System Functions
T is now in the menu/programming mode, and the
OUCH RACKER
Calibration
Define Sequence
Cam 3
Enter Patrn#?
Record Pattern
Alarm Actions
Record Pattern 1
Finish w <Next>
4-17