American Dynamics ADTT16 Operator's Manual page 48

4. Use the Tracker Ball to scroll through the menu selections until Record
Pattern is displayed.
5. Press the appropriate button—zoom or focus—to select Record
Pattern.
The following prompt appears on the LCD:
Note If you press a number that has already been assigned to a Pattern for this
camera, the new Pattern will overwrite the existing Pattern. There is no
warning to indicate that the existing Pattern will be replaced. Use caution.
6. Press the number on the keypad (1 - 3) that you want to assign to this
Pattern, for example 1.
The following message appears on the LCD:
7. The Pattern is now being recorded in real-time. If you let the camera sit
still at this point, that non-motion time will be recorded in the Pattern.
If you pressed an invalid number (any number greater than 3), the
T
the Pattern. If this happens, simply press a valid number and continue
with this procedure.
8. Move the camera around and create a logical, usable Pattern. Remember,
the three Patterns for this camera can collectively incorporate up to 98
camera commands, and each Pattern can be up to 6 minutes and 50
4-6
T will beep and the system will not allow you to program
OUCH RACKER
Record Pattern
Alarm Actions
Cam 3
Enter Patrn#?
Record Pattern 1
Finish w <Next>
Operator's Manual