American Dynamics ADTT16 Operator's Manual page 55

4. Press the appropriate button—zoom or focus—to select Alarm
Actions.
The information for that camera's first alarm input appears on the LCD.
When you set up an alarm, you will indicate which Quick View, Pattern,
or fixed shot will be called up when the alarm is triggered. You will also
indicate which output initiates when this alarm is triggered. The video
action and the output must be associated with the same dome.
A sample setup alarm LCD is shown here.
If an alarm input has not been set up yet, the fields will have dashes in
them. A setup alarm LCD contains the following information:
In this sample alarm, input 1 on camera 12 is the specific input that will
trigger the alarm. The alarm input, for example, could be a motion
detector that triggers an alarm when it senses motion. When this alarm is
triggered, Quick View 96 on camera 7 appears on the monitor. In
addition, output 3 on the same camera initiates automatically. The output
might be, for example, a light that turns on when the alarm is triggered.
Defining Automatic System Functions
1
This is the dome and input
that will trigger an alarm
when a change in state is
detected.
Cam12/1 => Cam7
3
This is the specific Quick View
or Pattern that appears when
the alarm is triggered. If there
is no number in this field, this
indicates a fixed shot.
Cam12/1 => Cam7
View96 Out3
2
This is the dome whose
video appears on the
monitor when the alarm
occurs.
View96 Out3
4
This is
output that
when the
triggered.
the specific
initiates
alarm is
4-13