American Dynamics ADTT16 Operator's Manual page 28

When cameras are displayed in the
4x4 format, you will be able to see
video from 16 cameras on the
monitor.
This format is available with 16-
camera multiplexers.
Press the Display button on the Main T
available display formats. Each time you press Display, the monitor changes
from 2x2, 3x3, 4x4, or full-screen format.
Regardless of which display format you choose, you will always have
control over the camera indicated on the LCD.
Tip: If your system includes only one monitor, press the Display button to
put the monitor in the quad display format. Press the number associated with
an individual camera to call that camera to the full-screen mode (or select
the full-screen display mode via the Display button).
If your system includes two monitors, the Main monitor will be dedicated
for quad display and the Call monitor will be dedicated for full-screen
display.
If your system includes one T
T
RACKER
control to the Call monitor, press the Sel button twice on the multiplexer. To
return control to the Main monitor, press the Sel button again.
2-6
OUCH
may be used to control either Main or the Call monitor. To switch
1
5
9
13
4x4 DISPLAY FORMAT
T
OUCH RACKER
T with two monitors, the T
RACKER
2 3 4
6 7 8
10 11 12
15 16
14
to choose from the
OUCH
Operator's Manual