USER'S QUICK GUIDE
Toggles the state of the
dome's output.
Invokes the menu.
Clears the last keypad entry
or active alarm.
Opens or closes the camera's iris,
making the picture on the monitor
appear darker or lighter.
Calls up video from a specific
camera.
Controls the camera's zoom function.
Can be swapped with focus.
Controls the camera's pan and tilt function.
Also allows you to interface with the menu.
Menu
!"#$%&"'$()
*+,$)+-.+/0+)1+
.+'02-3$+4
5+1(&6-7"''+&)
8#"&9-81'$():
!(),$;-*+<$1+:
5+:+'-*(9+
.+#+1'-=");0";+
>(;-7&$9"&?-@-A)6
>(;-B((9-@-C(10:
86D0:'-3E7F":+
.F(4-.?:-G),(
7$);-*(9+-@->>5
8000-1011-02, Rev. B1
Displays the Dome's ID Code.
Press the Menu button on the keypad to
invoke the menu. This scrollable menu
appears on the LCD. Only two menu
selections are visible at one time on the
LCD.
Move the Tracker Ball up and down to
scroll through the menu selections. To
select the item on the top line of the LCD
(in this example Define Sequence), press
the button on the left side of the T
T
. To select the item on the bottom
RACKER
line of the LCD (in this example Setup
View) press the button on the right side of
the T
T
.
OUCH
RACKER
AD T
Initiates the currently selected
SpeedDome's Apple Peel
pattern.
Sequences through the available
monitor display modes: 2x2, 3x3,
4x4, and full-screen.
Controls the camera's focus function.
Can be swapped with zoom.
The "Apple Peel" consists of three
revolutions of camera panning, with tilt
starting at the ceiling line. Each revolution
tilts down approximately 30°. The Apple
Peel will provide you with a complete view
of the area.
OUCH
T
®
OUCH
RACKER
Displays currently selected
camera number, Quick View
number or Pattern number.
Also displays system prompts
and messages.
Flips the currently
selected SpeedDome
180º.
Calls up a Quick View.
Calls up a Pattern one time.
Repeats a Pattern indefinitely.
Initiates the Sequence.
Enables you to step through
the installed cameras—one at
a time—in sequential order.
Apple Peel
APPLE PEEL PATTERN
AD T
T
OUCH
RACKER
16
16