Installation and Operating Instructions
Network
Call Monitor
Installing the Intellex Unit
Refer to the External Data Storage Installation instructions for more
information. (Contact your dealer or Sensormatic for this
document.)
NOTE: Do NOT connect the Intellex unit to a network unless you
also install the Network Client on the network.
NOTE: We recommend the use of shielded twisted-pair cable for
network operation.
Connect the cable from the local area network to Connector 14
(Network). Use Category 5 twisted-pair Ethernet cable (CAT 5
TPE). Refer to the Network Client instructions for more information.
To connect an optional call monitor:
Connect a call monitor to the BNC connector on the Call Monitor
board, connector 20, to see live video from a single camera (Call
mode) or from alarmed cameras in sequence (Spot mode). Refer to
Call Monitor Setup
on page 150 for more details.
13