Exit To Windows - American Dynamics Intellex Intellex LT Installation And Operating Instructions Manual

Installation and Operating Instructions

EXIT TO WINDOWS

Exit to Windows
CAUTION: Do NOT modify any BIOS or system settings. Do
NOT reconfigure any hard drives. Do NOT install any
other software, including screen savers. Otherwise,
you will affect unit operation.
Since the Intellex system uses the Windows operating system to
configure the regional, mouse, time zone, network, printer and
language settings, you must exit to Windows.
NOTE: Windows screens appear in English, regardless of the
language version of Intellex. Consult Microsoft Windows
installation instructions for setting the operating system to
another language.
NOTE: Exiting to the system is a protected feature. You must
possess the Exit to System privilege to access it (see
Security Setup
To exit to Windows:
1. From the main screen, click the Utility button. The Utility
Options screen appears (see
page 95 and Utility Options
2. Click Exit. A confirmation message appears.
3. Select No to cancel the exit process and return to the Utility
Options screen. Select Yes to exit to Windows. The Enter PIN
Code screen appears.
4. Enter the system exit code. (Contact your dealer or
Sensormatic for this code.) The unit displays asterisks as a
security measure.
a. Use the mouse pointer to click the numeric buttons to enter
the code. Click backspace to erase an entry.
b. Click OK to exit to the Windows operating system.
The system verifies the code. If you entered an incorrect PIN
code, the system returns to normal operation. If you entered the
correct PIN code, the system exits to Windows.
5. Move the mouse pointer to the bottom of the screen. The
Windows task bar appears.
6. Click the Start button. When the Start menu appears, move
the mouse pointer to Settings. The Settings menu appears.
on page 39).
Chapter 4 — Basic Operation
on page 105).
15
on