Modifying The Image; Brightness/Contrast Tools - American Dynamics Intellex Intellex LT Installation And Operating Instructions Manual

Installation and Operating Instructions

Modifying the Image

Brightness/Contrast Tools

Image Enhancement Tools
Restore — Click to cancel all changes to the image. The unit
displays the original image from the image database, but does not
change the magnification.
Click Close to close the image enhancement screen and return to
the playback screen. Click Help to display online help for this
screen.
This section describes how to modify the image using each of the
following tools:
• Brightness/Contrast Tools
• Color/Light Tools on page 138
• Balance Light on page 139
• Edge Detect on page 139
• Enhance Light on page 139
• Noise Reduction on page 139
• Sharpen on page 140
• Sharpen More on page 140
• Smooth on page 140
• Smooth More on page 140
NOTE: Each tool has a specific purpose. Therefore, some tools
may not be appropriate for a particular image. Practice
using the tools to learn how they operate. Click Restore
at any time to start over.
Use the brightness/contrast tools to brighten or darken the entire
image and/or to increase or decrease the contrast of light and dark
elements in the entire image.
Brightness — Use this slide control to adjust the brightness for the
image.
Move the control to the left to darken the image. Move it to the right
to lighten the image. As you move the control, the image reflects the
changes. The brightness chart (if displayed) also reflects the
changes.
on page 137
137