Chapter 4 - Logging In And Changing Users; Logging In - American Dynamics Intellex Intellex LT Installation And Operating Instructions Manual

Installation and Operating Instructions
Chapter 4 — Basic Operation
LOGGING IN AND
CHANGING USERS

Logging In

Logging In and Changing Users
NOTE: If system security is enabled, you must enter a valid PIN
code before the unit will clear the Enter PIN Code screen
and give you access to system controls (see
Setup on page 39).
When the unit is first powered up or after another user has logged
out, the Enter PIN Code screen appears.
Enter the four-digit PIN (Personal Identification Number) code
assigned by the system administrator. The unit displays asterisks as
a security measure.
Enter the code from one of the following:
Screen Keypad:
1. Use the mouse pointer to click the numeric buttons to enter
the code. Click backspace to erase an entry.
2. Click OK to log in.
Physical Keypad:
The physical keypad is located on the optional keyboard.
1. Make sure the numeric lock indicator on the keyboard is lit. If
not, press the numeric lock key on the keypad.
2. Press the numeric keys on the keypad to enter the code.
3. Press the Backspace key to erase an entry.
4. Press the Enter or Return key to log in.
The system verifies the code.
If the code is invalid, the system displays an error message. Click
OK to try again.
If the code is valid, the system accesses the security privileges
associated with the code. If the Utility Options screen appears, click
Close. The main screen appears.
95
Security