Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for American Dynamics EDVR
Summary of Contents for American Dynamics EDVR
-
Page 1: Quick Setup Guide
Quick Setup Guide EDVR Part Number 8200-0841-00 A0... - Page 2 1 Remove all items from the carton. If anything is missing or broken, please inform Customer Service immediately. 2 Save all cartons and packing materials to use for shipping or transporting EDVR. 3 Connect the main monitor to the Main Monitor BNC connector.
-
Page 3: Power Up And Test
(near the lower right corner) and gently press. The unit will start. Note The recessed power switch works in one of two ways: (1) Press quickly to turn the EDVR on or off. (2) Press and hold for at least 3 seconds to restart the EDVR. MENU button... -
Page 4: Optional) Select Video Output: Ntsc Or Pal
• Cables, Cords, and Other connectors If you have checked all of these items and the EDVR still fails to power up, or if you restarted the EDVR and it still fails to operate properly, please contact American Dynamics Technical Support. -
Page 5: Optional) Install Edvr Client Software
EDVR Quick Setup Guide F. (Optional) Install EDVR Client Software To remotely view and manage one or more EDVRs from a PC, install the included EDVR Client Software. Note Both the EDVR and the PC must be physically connected to the same network (LAN). - Page 6 EDVR Quick Setup Guide H. Connecting ADTT16E to EDVR 1 Connect the hardware. Refer to the following diagram: BNC Video EDVR Sensornet RS232 9600 Baud DOME Power RS232 over Cat 5 Cable Set Configure Deivces to MUX 16 Duplex/Triplex Note: Do not use MUX 16 posem 2 Configure the Touch Tracker (Config Devices).
-
Page 7: Main Menu
4. Load SD Card Settings 5. Load Factory Settings 6. Version Information Password Settings 1. Menu Password 2. Advanced Settings Password 3. Default Settings Password 4. Reformat Password Exit Menu 1. Exit Menu with Saving 2. Exit Menu Without Saving EDVR Quick Setup Guide... - Page 8 Alarm Settings 1. Alarm Duration 2. Disk Full Alert 3. Pre-Alarm 4. Alarm Record Rate 5. Alarm Record Mode 6. Alarm Record Quality 7. Sensor Type 8. Alarm Input Link 9. Alarm Out Link Record Settings 1. Record Quality 2. Normal Record Rate 3.
-
Page 9: Alarm Settings
Target Zone, Track Detect, Duration and DISPLAY button three times to bring up the Ether- Size of Target (default is the whole view). net screen to see the EDVR’s IP Address. Pre-Alarm Setting Main Menu > Advanced Settings > Alarm Settings >... -
Page 10: Date/Time Settings
Date/Time Settings General Date/Time Settings Access Protection Quick: Main Menu > Quick Settings > Time, Date. Main Menu > Advanced Settings > Operation Lock Detail: Main Menu > Display Options > Time Mode, > Highlight Front Button Lock, RS-232 Lock, Time Setting, Date Mode, Date Setting Playback Lock, Record Button Lock or Network Lock and set value to On or Off. -
Page 11: Schedule Settings
PTZ Cameras and Touch Tracker Search Control EDVR from an ADTT16e CD Search Button A: Menu mode Search > CD Button B: Play mode Button C: Freeze live video Search Filter Button D: End Menu/Play Search > Search Filter > Alarm Filter, Date Filter or... - Page 12 Notes: NTSC/PAL Toggle Hold Up and Pause buttons for a least 3 seconds ------------------------------------------------------------------- then follow the on-screen instructions. ------------------------------------------------------------------- Save System Settings to SD Card ------------------------------------------------------------------- Main Menu > Default Settings > Save SD Card Settings ------------------------------------------------------------------- ------------------------------------------------------------------- Set Password Protection With 4 Different Passwords ------------------------------------------------------------------- Main Menu >...