Printer Settings - American Dynamics Intellex Intellex LT Installation And Operating Instructions Manual

Installation and Operating Instructions
PRINTER
SETTINGS

Printer Settings

The factory pre-installs the printer drivers for the Hewlett-Packard
820c and 895c and Epson Stylus Color 640, 660, 777, 850 and 880
printers. The default printer is the Hewlett-Packard 820c. However,
you can change the default printer or install any printer which is
compatible with Windows.
To change the default printer:
1. From the Control Panel screen, double-click the Printers
icon. The Printers screen appears.
2. Right-click the printer to be the default. A popup menu
appears.
3. Select Set as Default. A checkmark appears next to the
selected printer icon, which is now the default.
To add a printer:
1. From the Control Panel screen, double-click the Printers
icon. The Printers screen appears.
2. Click the Add Printers icon on the Printers screen.
3. Follow the Add Printer Wizard instructions.
For more information, please refer to the documentation supplied
with the printer.
When the printer documentation says to shut down or restart the
computer, follow the directions under
System on page 23 in this chapter. Please note that restarting the unit
also restarts the Intellex software. Therefore, if the printer
documentation directs you to perform any additional steps, you
must exit the Intellex software again, using the Exit button on the
Utility Options screen.
Shutting Down and Restarting
21