American Dynamics Intellex Intellex LT Installation And Operating Instructions Manual page 107

Installation and Operating Instructions
Archive Schedule
Schedule Area — Use the main schedule area to define segments
for each camera. Hours are listed across the top of the schedule area
in 30-minute segments. Camera names are listed down the left side
of the schedule area in numerical order (1–16).
Select one of the following to configure the archive schedule:
Archive All — Select this option to define segments or portions
within a segment for archiving. For example, after defining an
Archive Alarmed or Disabled segment, click Archive All and select
timeframes within those segments to archive all available video.
Archive All segments appear in green on each camera's timetable.
Archive Alarmed — Select this option to define segments for
archiving alarmed video. For any Archive Alarmed segment, the
unit archives only alarmed video within the specified segment(s)
for each camera. Archive Alarmed segments appear in blue on each
camera's timetable.
Disabled — Select this option to disable scheduled archiving in
the specified segment(s). Click on Disabled, then select segment(s)
to exclude archiving in that timeframe from the scheduled
archiving. Disabled segments appear in red on each camera's
timetable.
To configure a segment:
1. Define segments using Archive All (green), Archive
Alarmed (blue) and/or Disabled (red) for each camera.
2. Within a segment you have defined, you may define
subsections using the other types. For example, you can
enable archiving for a timeframe within a disabled segment
(green within red), or you can activate archiving of all video
(green) within an alarmed (blue) or disabled (red) segment.
Use the following options to create and edit segments as
needed:
• Right-click on a segment and select Delete from the
Archive Schedule Popup Menu's edit options to delete
the segment from that camera's schedule.
• Drag either end of a segment to change the segment's
length.
93