Reviewing Unit Status - American Dynamics Intellex Intellex LT Installation And Operating Instructions Manual

Installation and Operating Instructions
REVIEWING UNIT
STATUS

Reviewing Unit Status

At any time, you can review unit and camera status. When you
press or click the Status button, the Status screen appears. The
information on this screen reflects the camera schedule settings as
well as the general unit configuration settings.
NOTE: You can change a column's width by dragging the line
between column headers to the right or the left. The unit
does not save the column width settings when you
access this screen again.
Status — Lists the connection and recording status for each
camera.
The first icon indicates if the camera is connected to the unit. If an
'X' is displayed over an icon, the camera is not connected.
The second icon indicates if the camera is being recorded. If an 'X'
is displayed over an icon, the camera is not being recorded. The
REC indicator on the front panel and the Record indicator on the
main screen are lit when the unit is recording at least one camera.
Camera — Lists the name for each camera, sorted by camera
number (1–16). Camera names are configured in the Cameras
portion of the Setup Options screen.
Quality — Lists the current record quality setting (Super, Normal
or Extended Record) for each camera. Quality settings are
configured in the Schedule portion of the Setup Options screen.
Sensitivity — Lists the current sensitivity setting (High or Normal)
for each camera. Sensitivity settings are configured in the Schedule
portion of the Setup Options screen.
Mode — Lists the current operating mode for each camera (Active,
Alarmed, Disabled or Stopped). Schedule mode settings are
configured in the Schedule portion of the Setup Options screen.
Pre-Alarm — Lists the pre-alarm setting (blank for zero, 15, 30, 45
or 60 seconds) for each camera in Alarmed mode. Pre-alarm settings
are configured in the Schedule portion of the Setup Options screen.
Filter — Lists the current filter, which is configured for each
camera in Active or Alarmed mode. Filter settings are configured in
the Schedule portion of the Setup Options screen.
103