American Dynamics Intellex Intellex LT Installation And Operating Instructions Manual page 167

Installation and Operating Instructions
Archive Operation
NOTE: Background archiving when recording in circular mode
can result in the record database "catching up" to the
archive. This may result in an abnormal termination of
archive or loss of some segments of information. To
prevent abnormal termination, start archiving before the
database becomes full and replace filled tape cartridges
promptly.
To archive in the background:
1. Insert a backup tape. (Refer to
page 183 for tape specifications.)
2. After the tape drive lights stop blinking, click Next. The unit
checks the tape. If a tape problem occurs, the unit displays a
message. Refer to the Intellex Troubleshooting Guide to identify
the appropriate action.
Click Cancel to cancel the operation and return to the main screen.
Click Help to display online help for the screen.
3. If the tape was used to archive images, the following screen
appears:
Select one of the options and click Next.
NOTE: The unit always writes its name on the archive tape.
Since all images on a tape are identified with the same
Intellex unit, we recommend that you append images
from only one Intellex unit to each tape.
Technical Specifications
153
on