American Dynamics Intellex Intellex LT Installation And Operating Instructions Manual page 171

Installation and Operating Instructions
Archive Operation
To archive in the foreground:
1. Insert a backup tape. (Refer to
page 183 for tape specifications.)
2. After the tape drive lights stop blinking, click Next. The unit
checks the tape. If a tape problem occurs, the unit displays a
message. Refer to the Intellex Troubleshooting Guide to identify
the appropriate action.
Each message screen provides one or more options in addition
to the following two buttons:
Click Cancel to cancel the operation and return to the main screen.
Click Help to display online help for the screen.
3. If the tape was used to archive images, the following screen
appears:
Select one of the following options and click Next:
NOTE: The unit always writes its name on the archive tape.
Since all images on a tape are identified with the same
Intellex unit, we recommend that you append images
from only one Intellex unit to each tape.
Append to the end of the tape. — Select this option to con-
tinue the archive after the last saved image on the tape. At
times, an archive operation may not fill a tape. This option lets
you use your archive tapes more fully.
Technical Specifications
157
on