Delete A User; Enable/Disable Security - American Dynamics Intellex Intellex LT Installation And Operating Instructions Manual

Installation and Operating Instructions

Delete a User

Enable/Disable Security

Security Setup
Use the Delete option to erase a user's security information. The
user will no longer have access to the system. Select the user from
the user list. To view other users, click the up down arrows, or drag
the scroll button up or down.
NOTE: You cannot delete the Administrator or the current user.
1. Click Delete. A confirmation screen appears.
2. Select Yes to delete the selected user. Select No to close this
screen without deleting the user.
NOTE: This function is only available to the Administrator. The
Enable (or Disable) button only appears when the
system administrator is logged in.
Use this option to either enable or disable system security. The unit
displays the appropriate button: Enable or Disable. The security
system is disabled as the factory default; you must initially enable
it.
When the Enable button appears, security is disabled. The system
does not require users to log in and lets them access all functions
(except this one).
When the Disable button appears, security is enabled. The system
requires users to log in and restricts them to their individual
privileges.
To enable (or disable) system security:
1. Click Enable (or Disable) from the user list screen. A
confirmation message appears.
2. Select Yes to enable (or disable) system security. The system
displays the Enter PIN Code screen. Select No to close the
message screen without enabling (or disabling) security.
3. Enter the system administrator's four-digit PIN code. The
unit displays asterisks as a security measure. Enter the code
from the Screen Keypad or the Physical Keypad.
Screen Keypad:
a. Use the mouse pointer to click the numeric buttons to enter
the code. Click backspace to erase an entry.
b. Click OK to enable (or disable) system security.
43