Format Tape - American Dynamics Intellex Intellex LT Installation And Operating Instructions Manual

164

Format Tape

Archive Operation
Intellex
To play restored images:
1. From the main screen, click the Archive button. The Archive
Options screen appears (see
2. Click Play restored images. The unit displays information
about the video segments in the restored images database.
3. Select one of the following options and click Finish:
Yes — Select this option to play the video segments. The unit
switches to playback operation. You can use all playback func-
tions on the restored images (see
page 111).
No — Select this option to close this screen and return to the
main screen.
Help — Click to display online help for the screen.
Select this option to format an archive tape. The unit guides you
through the following steps:
CAUTION: This operation erases all data from the archive
tape.
NOTE: Formatting an archive tape is a protected feature. You
must possess the Archive Enable privilege to access it
(see Security Setup
1. From the main screen, click the Archive button. The Archive
Options screen appears (see
2. Click Format tape.
3. Insert the backup tape to format.
4. After the tape drive lights stop blinking, click Next. The unit
checks the tape. If a tape problem occurs, the unit displays a
message. Refer to the Intellex Troubleshooting Guide to identify
the appropriate action.
Each message screen provides one or more options in addition
to the following two buttons:
Click Cancel to cancel the operation and return to the main
screen. Click Help to display online help for the screen.
5. The unit formats the tape.
®
LT Digital Video Management System
Archive Operation
Playback Operation
on page 39).
Archive Operation
on page 151).
on
on page 151).