Alarm In Names Setup; Alarm In Polarity Setup - American Dynamics Intellex Intellex LT Installation And Operating Instructions Manual

80

Alarm In Names Setup

Alarm In Polarity Setup

Alarms Setup
Intellex
Resolution — This setting lets you choose either 640x240 or
320x240. The default is 640x240.
640x240 — This setting offers higher resolution, but less
recording time.
320x240 — This setting provides less resolution, but extends
the recording time.
Click OK to accept the displayed alarm setup options, as well as any
changes on the other Alarm Setup screens, and return to the Setup
Options screen. Click Cancel to cancel the changes. Click Help to
display online help for this screen.
Use the Alarm In Names screen to define the name of each alarm
input. These names are used when reviewing alarm images and
when searching the image database.
1–16 — Use the mouse pointer to highlight one of the current
alarm input names. Then use the virtual keyboard or the physical
keyboard (if attached) to enter the new name, up to 10 characters.
The default names are AlarmIn1 through AlarmIn16.
Click OK to accept the displayed alarm input names, as well as any
changes on the other Alarm Setup screens, and return to the Setup
Options screen. Click Cancel to cancel the changes. Click Help to
display online help for this screen.
Use the Alarm In Polarity screen to set the polarity for each of the
alarm inputs.
NOTE: The virtual keyboard is disabled on the Alarm In Polarity
screen.
Alarm Input — The names of each alarm input are listed in the
Alarm In Polarity screen. These names are configured in the Alarms
In Names screen.
Polarity — Select the desired polarity for this alarm input:
Active-Low or Active-High. That is, select the signal that triggers
an alarm. The default setting is Active-Low.
1. Click down arrow for the alarm input. The two polarity
options appear.
2. Click the desired alarm input polarity.
®
LT Digital Video Management System