Export Directory - American Dynamics Intellex Intellex LT Installation And Operating Instructions Manual

120

Export Directory

Playback Screen
Intellex
Highlight a clip and press Edit to edit the clip name, press Play to
play the clip (click Pause to pause playback), press Delete to delete
the highlighted clip, or right-click the mouse to choose from Select
All, Clear All, Delete All to select or delete clips. Only selected
(checked) clips will be exported.
Click Export to export any selected clip(s) to the CD-RW drive.
After you click Export, the Export Directory dialog appears, where
Export to CD-R(W) is the default option.
The Fill CD option performs an instant export of all video data from
all cameras until the CD is filled.
• Be sure the CD-RW drive contains a blank CD before
activating this option! Use the 700 MB size media for
maximum recording.
• The amount of video saved by Fill CD depends on the
number of cameras and how the Intellex unit is configured.
Any clips stored in the Selective Export window are
ignored by Fill CD but remain available for later review or
export.
NOTE: When a clip is checked, the camera(s) associated with
that clip are also checked. Any camera can be selected
to play video for the span of the selected clip. A camera
can be added to (or removed from) the clip by checking
(or clearing) that camera's checkbox. At least one
camera will be associated with each clip.
In the Export Directory dialog, either
1. Accept the Export to CD-R(W) option to write the selected
clip(s) to the CD-RW drive; or
2. Deselect (click on) Export to CD-R(W) to enable the Export
Directory option.
Exporting to CD:
If writing to a CD, be sure a blank CD is in the CD-RW drive before
clicking Export.
Exporting to Directory:
After you click Export to CD-R(W) to enable the Export Directory
option, use the pull-down list, or click Browse, to choose a
destination for the selected clip(s).
®
LT Digital Video Management System