Image Problems - American Dynamics Intellex Intellex LT Reference And Troubleshooting Manual

PROBLEM
Image rate slow;
quality OK.
Image quality poor.
No video signal
from camera.
Live images appear
too dark or too
bright or display
bad color on the
optional video out
monitor.
Live images appear
too dark.
Troubleshooting Guide
Intellex® LT Digital Video Management System

IMAGE PROBLEMS

POSSIBLE CAUSES
Camera not mounted
properly.
Camera is random interlace
or faulty.
Camera is random interlace
or faulty.
Camera is low resolution.
Camera or lens out of
adjustment or faulty.
No power to camera.
Faulty video connections to
camera.
Camera is not scheduled
for operation or the
IntelleCord filter is not
properly configured.
Optional video out monitor
not correctly adjusted.
Camera iris is not correctly
adjusted.
SUGGESTED ACTION
Stabilize camera mount.
Check camera operation.
Replace with 2:1 (full)
interlace camera.
Check camera operation.
Replace with 2:1 (full)
interlace camera.
Replace with higher
resolution camera.
Check adjustment and
operation of the camera and
lens.
Replace camera or lens.
Check camera power.
Check or replace video
connections.
Configure an Active or
Alarmed segment for the
camera without a filter on the
Schedule Setup screens.
Adjust optional video out
monitor.
Adjust camera iris.
19