UPPER MAIN HARNESS INSTALLATION (6 OF 6)
21
Upper main harness installed in bottom cabinet.
23
Connect Optical block fan connector(black 3P) to upper harness.
Bundle slack wire below connector with 5mm purselock (p/n:3-703-
981-02).
KF-E42A10/E50A10
22
After docking chassis, connect CN8002(14P), CN8403(3P), and CN8410(15P)
Dress CN8002 cables with mounted black lead pin (CL8002).
24
On lower right side of duct block, connect
lamp temperature
connectors.
temperature
sensor,
lamp
switch,
KF-E42A10/E50A10
Tool / Torque
-Phillips Screw Driver
-[4x16mm screw]
-13kg*cm +-1.0kg*cm
Caution Points
Please Follow All
CAUTION
points listed. It
is important to control
VARIATION of wire
routing for minimizing
Electro Maagnetic
Interference (EMI)
70