CHASSIS ASSEMBLY (2 OF 3)
5
Install Connector Assy 1-910-015-20 between CN8402
and CN9504. Dress cables in two coated pins
mounted on AGA-Bd.
CAUTION: Dress wires above P-Bd shield PARALLEL to
PWB. Coated pin and wires must touch P-Bd shield.
7
Install Conn. Assy. 1-910-015-28 to CN8404 and dress in coated
lead pin CL8003.
CAUTION: Make sure clamp and cables are touching side of
shield cases.
KF-E42A10/E50A10
6
Install Shield covers (p/n:2-596-915-01; 2-596-915-11) on AGA-Bd.
8
Install Conn. Assy. 1-910-015-23 on CN8815 and dress in coated
lead pin.
KF-E42A10/E50A10
Tool / Torque
-Phillips Screw Driver
-[3x12mm]
-7kg-cm +-0.5kg-cm
-[3x8mm]
- 5kg-cm +-0.5kg-cm
Caution Points
Please Follow All
CAUTION
points listed. It
is important to control
VARIATION of wire
routing for minimizing
Electro Maagnetic
Interference (EMI)
46