SPEAKER GRILL ASSEMBLY (3 OF 3)
9
Install Latch (p/n:4-088-589-11) with 3x12mm screw (p/n:7-
685-648-79).
CAUTION: Make sure wires do not pinch between latch
and slot in boss.
11
Route wires through the cable holder (p/n:2-599-
956-01).
CAUTION: Make sure cables are routed under each
clip on the holder. Any cables not routed under
clips may pinch on speaker grill when installed.
KF-E42A10/E50A10
10
Install Latch (p/n:4-088-589-11) with 3x12mm screw (p/n:7-685-648-79) on the
opposite side of the ferrite core (next to wire guide).
CAUTION: Make sure wires do not pinch between latch and slot in boss.
12
13
Fix position of Cable Holder with 3x12mm screws
(p/n:7-685-648-79) [2 places].
CAUTION: Make sure no wires pinch in between grill
and cable holder.
KF-E42A10/E50A10
Tool / Torque
-Phillips Screw Driver
-[3x12mm]
- 7kg-cm +-1.0kg-cm
Caution Points
Please Follow All
CAUTION
points listed. It
is important to control
VARIATION of wire
routing for minimizing
Electro Maagnetic
Interference (EMI)
62