Sony KF-E42A10 Service Manual page 64

TERMINAL ASSEMBLY (2 OF 2)
3
Install purselock (p/n:4-077-726-10); M3 clamp (p/n:2-
594-860-01) and 3x12mm screw(p/n:7-685-648-79)
5
Attach Cushion Foot to side of terminal bracket to hold AC
Cord Plug in Plug holder.
CAUTION: Make sure plug cannot dislocate from plug holder
after installing cushion foot.
KF-E42A10/E50A10
4
Install Connector Cap (p/n:2-593-083-01) and 3x12mm screw(p/n:7-685-
648-79).
6
CAUTION: BEFORE Installing Terminal Bracket, confirm no
cables are in between HDMI and Lower Shield Covers.
KF-E42A10/E50A10
Tool / Torque
-Phillips Screw Driver
-[3x12mm]
-7kg-cm +-1.0kg-cm
Caution Points
64