B BLOCK ASSEMBLY (3 OF 5)
9
Install FFC Guard over FFC Cables (p/n:2-652-122-01)
CAUTION: Make sure FFC Guard "snaps" into place. Push
all corners to confirm FFC Guard is properly seated.
11
Route wires of 1-910-021-64 under tab on DM Sheet
Shield, when installing TA bracket.
CAUTION: Make sure wires do not pinch on metal
parts.
KF-E42A10/E50A10
10
Install 15P Connector Assy. 1-910-021-64 on CN5701. Dress wires in coated
lead pin (CLP5700).
12
Fix position of TA Bracket with 3x8mm screws [2
places]. p/n: 2-580-593-01
KF-E42A10/E50A10
Tool / Torque
-Phillips Screw Driver
- 5kg-cm +-0.5kg-cm
Caution Points
Please Follow All
CAUTION
points listed. It
is important to control
VARIATION of wire
routing for minimizing
Electro Maagnetic
Interference (EMI)
39