LOWER MAIN HARNESS INSTALLATION (1 OF 3)
1
Lower Main Harness Diagram (p/n:1-910-021-62)
3
Route wires of 1-910-021-62 in purselock (center-
bottom) on C-Shield.
Purselock p/n:3-704-444-11
CAUTION: Note black tape is LEFT of purselock. Use
the tape position for alignment reference.
KF-E42A10/E50A10
2
5-1
Use split in Lower Harness ( 5-1 on diagram) as a reference to
place cables in purselock on bottom-right side of C-Shield
p/n:3-704-444-11.
CAUTION: Note Taping on Cable is LEFT of purselock. Use the
Taping as reference for aligning cable placement.
4
Route Lower Harness cable in FRONT of tall purselock. Route
LVDS Cable (from C-Shield) BEHIND tall purselock.
Route ALL cables in M3 Clamp (including Upper Harnes
cables).
KF-E42A10/E50A10
Tool / Torque
-Phillips Screw Driver
-[3x12mm]
- 7kg-cm +-1.0kg-cm
Caution Points
Please Follow All
CAUTION
points listed. It
is important to control
VARIATION of wire
routing for minimizing
Electro Maagnetic
Interference (EMI)
53