UPPER MAIN HARNESS INSTALLATION (3 OF 6)
9
Connect upper main harness leads to lamp fan, and
ballast sensor connectors. Connect Lamp door sensor
connector (grey/white wires) left of lamp fan.
11
Connect duct fan (black 3P connector) to upper
main harness mating connector ( 4-3 on diagram)
KF-E42A10/E50A10
10
Completed Duct block connection.
Note lamp door sensor cables (grey/white) are routed OUTSIDE of the
purselock.
12
Dress All duct block/sensor cables (except ballast
power cables) in M4 clamp.
M4 clamp p/n:2-594-861-01
4x16mm screw p/n:2-580-640-01
KF-E42A10/E50A10
Tool / Torque
-Phillips Screw Driver
-[4x16mm screw]
-13kg*cm +-1.0kg*cm
Caution Points
Please Follow All
CAUTION
points listed. It
is important to control
VARIATION of wire
routing for minimizing
Electro Maagnetic
Interference (EMI)
67