Sony KF-E42A10 Service Manual page 69

UPPER MAIN HARNESS INSTALLATION (5 OF 6)
17
CAUTION: Please confirm ferrite is closed/locked.
19
Install RF Bracket/Cable on Bottom cabinet
4x16mm screw (p/n:2-580-640-01) [2 places]
KF-E42A10/E50A10
18
Secure ferrite core over duct block by using two pieces of himelon
tape (overlapped). Use circular molding mark as horizontal ref-
erence. Apply edge of tape between circular molding mark,
and top of molded text (vertical alignment).
CAUTION: Make sure ferrite is tightly taped to top of duct block.
Any slack will cause the ferrite core to move during transportation
which can damage/dislocate ferrite core.
20
Another view of completed duct block assembly.
Note wire routing (especially around purselock).
KF-E42A10/E50A10
Tool / Torque
-Phillips Screw Driver
-[4x16mm screw]
-13kg*cm +-1.0kg*cm
Caution Points
Please Follow All
CAUTION points listed. It
is important to control
VARIATION of wire
routing for minimizing
Electro Maagnetic
Interference (EMI)
69