Using The Control Panel Memory - Omron SX-F Instruction Manual

Using the Control Panel Memory

7-4 Using the Control Panel Memory
Data can be copied from the VSD to the memory in the control panel and vice
versa. To copy all data (including parameter set A-D and motor data) from the
VSD to the control panel, select Copy to CP[244], Copy to CP.
To copy data from the control panel to the VSD, enter the menu [245], Load
from CP and select what you want to copy.
The memory in the control panel is useful in applications with VSDs without a
control panel and in applications where several variable speed drives have the
same setup. It can also be used for temporary storage of settings. Use a con-
trol panel to upload the settings from one VSD and then move the control
panel to another VSD and download the settings.
Note Load from and copy to the VSD is only possible when the VSD is in stop
mode.
Fig. 48 Copy and load parameters between VSD and control panel
VSD
Section 7-4
61