Connect Motor And Mains Cables - Omron SX-F Instruction Manual

Connect motor and mains cables

3-3 Connect motor and mains cables
SX-D4045-EF to SX-D4132-EF and SX-D6090-EF to SX-
D6160-EF
To simplify the connection of thick motor and mains cables to the VSD model
SX-D4045-EF to SX-D4132-EF and SX-D6090-EF to SX-D6160-EF the cable
interface plate can be removed.
Motor cable
DC+, DC-, R (optional)
Mains cable
Fig. 27 Connecting motor and mains cables
1. Remove the cable interface plate from the VSD housing.
2. Put the cables through the glands.
3. Strip the cable according to Table 8.
4. Connect the stripped cables to the respective mains/motor terminal.
5. Fix the clamps on appropriate place and tighten the cable in the clamp with
good electrical contact to the cable screen.
6. Put the cable interface plate in place and secure with the fixing screws.
Clamps for screening
Cable interface
Section 3-3
31