Other
4.4.26
Fusing Motor (M4)
[1]
4.4.27
Intermediate Transport Motor (M3)
4.4.28
Synchronizing Roller Clutch (CL2)
1. Remove PWB Box/1.
☞ 2-47
2. Remove PWB Box/2.
☞ 2-48
[2]
3. Disconnect the connector [1], and
remove four screws [2] and the Fus-
ing Motor [3].
NOTE
• When installing the Fusing Motor,
[3]
try to insert it straight, and take
care not to damage the gears.
4138fs2030c0
1. Remove PWB Box/1.
☞ 2-47
2. Remove PWB Box/2.
[1]
☞ 2-48
[3]
3. Disconnect the connector [1], and
remove four screws [2] and the Inter-
mediate Transport Motor [3].
NOTE
[2]
• When installing the Intermediate
Transport Motor, try to insert it
straight, and take care not to dam-
age the gears.
4138fs2031c0
1. Open the Right Door.
2. Remove the bearing [1].
Precautions for Reinstallation
• When reinstalling the bearing, make
sure that the rib on the inside of the
[1]
bearing faces as shown in the illus-
tration on the left.
4138fs2032c1
2-50
Main Unit Field Service