Main Unit Field Service
4.6
CONSUMABLE USAGE
NOTE
• When the toner remaining in the cartridge is between 88% and 100%, the display
shows "100%," regardless of the actual amount. The amount of toner supplied to
the toner cartridge may vary slightly. Also, some toner is consumed when check-
ing the screen during manufacture.
• When the amount of toner is 87% or less, the display shows the exact amount of
toner.
4.6.1
BLACK TONER
Function
• Displays the remaining life of the Toner Cartridge (K) as a percentage.
Use
• To check the remaining life of the Toner Cartridge (K).
4.6.2
CYAN TONER
Function
• Displays the remaining life of the Toner Cartridge (C) as a percentage.
Use
• To check the remaining life of the Toner Cartridge (C).
4.6.3
MAGENTA TONER
Function
• Displays the remaining life of the Toner Cartridge (M) as a percentage.
Use
• To check the remaining life of the Toner Cartridge (M).
4.6.4
YELLOW TONER
Function
• Displays the remaining life of the Toner Cartridge (Y) as a percentage.
Use
• To check the remaining life of the Toner Cartridge (Y).
4.7
DIRECT PRINT
NOTE
• Available only when an optional Camera Direct Photo Print Card is installed on the
magicolor 5440 DL.
4.7.1
IMAGE QUALITY
Function
• Sets the output resolution for Camera Direct Photo Printing.
Use
• To change the output resolution Camera Direct Photo Printing.
Setting
• The output resolution for each setting is as follows:
/procedure
- DRAFT: 600 dpi
- NORMAL: 1,200 dpi x 600 dpi
- FINE: 2,400 dpi x 600 dpi
NOTE
• When using Normal mode/Fine mode, an addition 128 MB of memory needs to
be installed. Only Draft mode is available with the printer's base memory.
The default setting is "DRAFT."
DRAFT
NORMAL
3-19
Menu (magicolor 5430 DL /5440 DL)
FINE