Malfunction Messages - Konica Minolta magicolor 5430 DL Service Manual

Main Unit Field Service
3.2.6

Malfunction messages

☞ For details of malfunction messages and troubleshooting procedures, see "IV Trouble-
shooting."
Message
• A Duplex Option is not installed.
ILLEGAL ERROR
• A 2-sided print cycle has been initiated using a type and size of media not
DUPLEX
ERROR
• The AIDC Sensor is faulty.
AIDC SENSOR
FATAL ERROR
• The Engine or Controller is faulty.
CODE:XXXX
ERROR
• A communications error has occurred in the USB or Ethernet interface.
COMMUNICATION
ERROR • There is a connection fault between the Mechanical Control Board (PWB-A)
ENGINE INTERFACE
ERROR
• An error has occurred during RAM read/write operations.
RAM
ERROR
• A fault has occurred in SDRAM DIMM.
DIMM
ERROR
• An error has occurred in ROM.
ROM
ERROR
• A fault has occurred in the controller.
CONTROLLER
*: The lower the message in the above list, the higher the priority.
Description of the Control Panel (magicolor 5430 DL /5440 DL)
supported for 2-sided printing.
and Print Control Board (PWB-P).
3-9
Description